This stand alone program will allow you to display and edit data on dasd
in a stand-alone environment when there is no MVS system available. This
program was written to diagnose IPL device configuration problems, and
to overcome the problem of having to re-ipl an entire MVS system in order
to correct a minor IPLPARM, PARMLIB, PROCLIB or VTAMLST error. It is by
no means a recommended procedure to make configuration changes, but it
can save valuable time making these types of corrections.
The utility is password protected, this has a twofold purpose:
When the program is terminated, it can only be restarted by an IPL.
The distribution file ZZSA.ZIP contains the following files:
All files must be uploaded to MVS as F(B) 80 sequential datasets, ZZSATIMG and ZZSADIMG are both in netdata format, and must be unloaded to unblocked datasets with the following TSO command:
RECEIVE INDATASET(ZZSADIMG)and
RECEIVE INDATASET(ZZSATIMG)
There are now 3 different types of image of this program:
All 3 different versions are exactly the same, other then the initial IPL CCW chain to load the entire image. The card image has been added to support the virtual reader on VM as an IPL device in order to create a named saved system, and is also supported on real readers for those who like to IPL a deck of cards.
IPLtext can be written to DASD using the folling JCL:
//JJAEGERD JOB ,ZZ,CLASS=A,MSGCLASS=X,MSGLEVEL=(1,1), // NOTIFY=JJAEGER //WRITETXT EXEC PGM=ICKDSF,PARM=NOREPLYU //SYSPRINT DD SYSOUT=* //SAUTILDD DD DSN=JJAEGER.ZZSADASD,DISP=SHR //SYSIN DD * REFORMAT UNIT(cua) VERIFY(volser) IPLDD(SAUTILDD,ABS) /*
IPL text can be written to TAPE using the following JCL:
//JJAEGERT JOB ,ZZ,CLASS=A,MSGCLASS=X,MSGLEVEL=(1,1), // NOTIFY=JJAEGER //WRITETXT EXEC PGM=IEBGENER //SYSPRINT DD SYSOUT=* //SYSIN DD DUMMY //SYSUT1 DD DSN=JJAEGER.ZZSATAPE,DISP=SHR //SYSUT2 DD DSN=JJAEGER.TAPE,DISP=(NEW,KEEP), // UNIT=TAPE,VOL=SER=SAEDIT,LABEL=(1,BLP,EXPDT=98000)
The default password is ZZSECRET, which is defined as CL8, and can be changed using AMASPZAP, or for DASD IPL text this utility can be used to alter the password using the zap option. The password is always logically OR-ed with blanks before being compared with the stored value, so only uppercase passwords are supported. The password is contained in the last eight bytes of record CCHHR 0000000006 when the utility is installed on DASD.
Upload ZZSACARD.BIN to VM as IPL ZZSA A (recfm f, lrecl 80), and issue the following commands:
SP PUN TO * RDR PUN IPL ZZSA A (NOH ORDER RDR fileno IPL rdrdev CLEAR STOP ST B8 0 ST 220 40404040 40404040 ST U220 password DEFSYS ZZSA 0-7 EW MACHMODE XA,ESA PARMREGS=NONE MINSIZE=1M [RSTD] SAVESYS ZZSA TERM CONMODE 3270 IPL ZZSA
In order to initialise the program perform the following tasks:
In order to initialise the program from the CDROM on the HMC perform the following tasks:
ZZSAPSWD Stand Alone Utilities Enter Password: ===> ________ Jan Jaeger - Version 12/29/90-15.44
ZZSAPRIM Stand Alone Utilities Option ===> _ 0 ListDev - List all devices 1 Browse - Browse dataset or member Console 0040/3274 2 Edit - Edit dataset or member IPL Device 0503/3390 3 ListVTOC - List Volume Table Of Contents IPL CPU 0001 4 ListPDS - List PDS directory CPU Version FF 5 DispVol - Display DASD volume label CPU Serial 123456 6 Dump - Dump DASD record by CCHHR CPU Model 3090 7 Zap - Alter DASD record by CCHHR Date (TOD) 09/01/1991 X Exit - Terminate program Time (TOD) 23:08:15 Jan Jaeger - Version 12/29/90-15.44
This option lists valid subchannels and their properties
| SCH | Subchannel number |
| DEV | Device name |
| CHP | Channel path ID list |
| C/T | Controller type and model code (from SENSE ID) |
| D/T | Device type and model code (From SENSE ID) |
| VOL | Volume Serial (DASD devices only) |
| VTOC | VTOC pointer in CCHHR format (DASD devices only) |
Invalid or unassigned subchannels are not listed. Unassigned subchannel numbers usually exist in an LPAR environment. These will show as gaps in the subchannel number range.
Using this option will fully initialise the volume serial table so that the volsers can be used in all other options rather then the device address. All browse commands are valid while viewing the output.
ZZSABROW Device List Command ===> _ Line 0000 Col 0001 ********************************* Top of Data ********************************** SCH=0000 DEV=0009 CHP=F0 C/T=3274-1D SCH=0001 DEV=0191 CHP=05 25 12 1A C/T=3990-CC D/T=3390-06 VOL=CMS191 SCH=0002 DEV=0923 CHP=09 19 11 29 C/T=3990-C2 D/T=3390-0A VOL=SYSWRK SCH=0003 DEV=0924 CHP=09 19 11 29 C/T=3990-C2 D/T=3390-0A VOL=SYSTST SCH=0004 DEV=0925 CHP=09 19 11 29 C/T=3990-C2 D/T=3390-0A VOL=SYSDLB SCH=0005 DEV=0926 CHP=09 19 11 29 C/T=3990-C2 D/T=3390-0A VOL=SYSACC SCH=0006 DEV=0927 CHP=09 19 11 29 C/T=3990-C2 D/T=3390-0A VOL=SYSMSC SCH=0007 DEV=0040 CHP=F0 SCH=0008 DEV=0041 CHP=F0 SCH=0009 DEV=0042 CHP=F0 SCH=000A DEV=0043 CHP=F0 SCH=000B DEV=0044 CHP=F0 SCH=000C DEV=0045 CHP=F0 SCH=000D DEV=0046 CHP=F0 SCH=000E DEV=0047 CHP=F0 SCH=000F DEV=0048 CHP=F0 SCH=0010 DEV=0049 CHP=F0 SCH=0011 DEV=004A CHP=F0 SCH=0012 DEV=004B CHP=F0 SCH=0013 DEV=004C CHP=F0 F3=End F5=RFind F7=Up F8=Down F10=Left F11=Right
ZZSABROW Device List Command ===> _ Line 0000 Col 0017 ********************************* Top of Data ********************************** 1 CHP=F0 C/T=3274-1D 1 CHP=05 25 12 1A C/T=3990-CC D/T=3390-06 VOL=CMS191 VTOC=0000001000 3 CHP=09 19 11 29 C/T=3990-C2 D/T=3390-0A VOL=SYSWRK VTOC=0459000001 4 CHP=09 19 11 29 C/T=3990-C2 D/T=3390-0A VOL=SYSTST VTOC=0459000001 5 CHP=09 19 11 29 C/T=3990-C2 D/T=3390-0A VOL=SYSDLB VTOC=0459000001 6 CHP=09 19 11 29 C/T=3990-C2 D/T=3390-0A VOL=SYSACC VTOC=0459000001 7 CHP=09 19 11 29 C/T=3990-C2 D/T=3390-0A VOL=SYSMSC VTOC=0459000001 0 CHP=F0 1 CHP=F0 2 CHP=F0 3 CHP=F0 4 CHP=F0 5 CHP=F0 6 CHP=F0 7 CHP=F0 8 CHP=F0 9 CHP=F0 A CHP=F0 B CHP=F0 C CHP=F0 F3=End F5=RFind F7=Up F8=Down F10=Left F11=Right
ZZSABROW Device List Command ===> _ Line 0021 Col 0001 SCH=0014 DEV=004D CHP=F0 SCH=0015 DEV=004E CHP=F0 SCH=0016 DEV=004F CHP=F0 SCH=0017 DEV=000C CHP=F0 SCH=0018 DEV=000D CHP=F0 SCH=0019 DEV=000E CHP=F0 SCH=001A DEV=0190 CHP=05 25 12 1A C/T=3990-CC D/T=3390-06 VOL=MNT190 SCH=001B DEV=019A CHP=05 25 12 1A C/T=3990-CC D/T=3390-06 VOL=MNT19A SCH=001C DEV=019B CHP=05 25 12 1A C/T=3990-CC D/T=3390-06 VOL=MNT19B SCH=001D DEV=019D CHP=05 25 12 1A C/T=3990-CC D/T=3390-06 VOL=MNT19D SCH=001E DEV=019E CHP=05 25 12 1A C/T=3990-CC D/T=3390-06 VOL=MNT19E SCH=001F DEV=019F CHP=05 25 12 1A C/T=3990-CC D/T=3390-06 VOL=MNT19F ******************************** Bottom of Data ******************************** F3=End F5=RFind F7=Up F8=Down F10=Left F11=Right
Enter the fully qualified dataset name without quotes, and in case of a PDS enter the PDS member name.
If the volume has been referred to, or option 0 has been used to initialise the volume serial table, then a volser can be entered rather then a device address. If the volume is being referred to for the first time since the IPL then the device address must be given.
ZZSABRDS Browse dataset or member Command ===> Enter dataset name: ===> _ Enter member name (PDS only): ===> and 4 digit DASD device number: ===> or DASD volume serial: ===> Note: The DASD volume must have been accessed previously in order to be able to specify the volume serial. If the device number is unknown use primary menu option 0 to read all DASD volume labels first.
Browse supports the following primary commands:
Will move max-right, max-left, top or bottem depending on the pf-key pressed.
Will move to the top (line 1) of the file.
Will move to the last line of the file.
Moves one page backward. When the cursor is located in the output area, the current line will become the last line in the output area.
Moves one page forward. When the cursor is located in the output area, the current line will become the first line in the output area.
FIND STRING will search for string in the file.
Will find the next occurrence of string in the file.
Moves 80 columns to the left in the output file. When the cursor is located in the output area, the current column will become the rightmost column in the output area.
Moves 80 collumns to the right in the output file. When the cursor is located in the output area, the current column will become the leftmost column in the output area.
Will sort the file, when the cursor is located in the output area, the file will be sorted on the cursor column.
Returns to previous panel. Data will be discarded in edit mode, use SAVE or FILE to save data first.
ZZSABROW Browse SYS1.PARMLIB(IEASYSS3) Command ===> _ Line 0000 Col 0001 ********************************* Top of Data ********************************** ALLOC=00, /* ALLOC00 ALLOCATION DEFAULTS MEMB. */ CLOCK=00, /* CLOCK00 CLOCK MEMBER (NOPROMPT) */ CLPA, /* CREATE PAG.LINK PACK AREA */ CMB=(COMM,100), /* CHANNEL MEASUREMENT BLOCK */ CMD=(S3), /* COMMNDS3 FIRST COMMANDS */ CON=S3, /* CONSOLS3 CONSOLE MEMBER */ CSA=(3584,16382), /* CSA/ECSA RANGE IN KBYTES */ DIAG=00, /* DIAG00 COMMON/GETM.FREEM.STOR */ DEVSUP=00, /* DEVSUP00 3480 SUBSYSTEM WITH IDRC */ DUMP=DASD, /* DUMP ON DASD SYS1.DUMPXX */ FIX=00, /* IEAFIX00 FIXED LPA MEMBER */ IOS=00, /* IECIOS00 MIH H-I/O SPEC. MEMBER */ LNK=(S3,L), /* LNKLSTS3 LINKLIST MEMBER */ LNKAUTH=APFTAB, /* LINKLIST NOT APF */ LOGCLS=L, /* SYSLOG OUTPUT CLASS */ LOGLMT=999999, /* CLOSE SLOG. 999.999 WTL'S */ LPA=(S3,L), /* LPALSTS3 LPALIST MEMBER */ MAXUSER=100, /* MAX. 100 ADDRESS SPACES */ MSTRJCL=00, /* MSTJCL00 LMOD MEMBER SYS1.LINKLIB */ NSYSLX=60, /* NUMBER OF SYSTEM LX'S RESERVED */ F3=End F5=RFind F7=Up F8=Down F10=Left F11=Right
If the volume has been referred to, or option 0 has been used to initialise the volume serial table, then a volser can be entered rather then a device address. If the volume is being referred to for the first time since the IPL then the device address must be given.
Edit supports F(B) 80 datasets only. Datasets with other DCB attributes can only be altered with the ZAP option
ZZSAEDDS Edit dataset or member Command ===> Enter dataset name: ===> _ Enter member name (PDS only): ===> and 4 digit DASD device number: ===> or DASD volume serial: ===> Note: The DASD volume must have been accessed previously in order to be able to specify the volume serial. If the device number is unknown use primary menu option 0 to read all DASD volume labels first.
In addition to all browse primary commands edit supports the following commands:
When saving a dataset or member only updated records will be written back to DASD, a SAVE command with no changed data will not cause a DASD update to occur. SAVE will not update any fields in the F1DSCB, last reference dates etc. will not be updated.
ZZSAEDIT Edit SYS1.PARMLIB(IEASYSS3) Command ===> _ Line 0000 Col 0001 ******************************** Top of Data ********************************* ALLOC=00, /* ALLOC00 ALLOCATION DEFAULTS MEMB. */ CLOCK=00, /* CLOCK00 CLOCK MEMBER (NOPROMPT) */ CLPA, /* CREATE PAG.LINK PACK AREA */ CMB=(COMM,100), /* CHANNEL MEASUREMENT BLOCK */ CMD=(S3), /* COMMNDS3 FIRST COMMANDS */ CON=S3, /* CONSOLS3 CONSOLE MEMBER */ CSA=(3584,16382), /* CSA/ECSA RANGE IN KBYTES */ DIAG=00, /* DIAG00 COMMON/GETM.FREEM.STOR */ DEVSUP=00, /* DEVSUP00 3480 SUBSYSTEM WITH IDRC */ DUMP=DASD, /* DUMP ON DASD SYS1.DUMPXX */ FIX=00, /* IEAFIX00 FIXED LPA MEMBER */ IOS=00, /* IECIOS00 MIH H-I/O SPEC. MEMBER */ LNK=(S3,L), /* LNKLSTS3 LINKLIST MEMBER */ LNKAUTH=APFTAB, /* LINKLIST NOT APF */ LOGCLS=L, /* SYSLOG OUTPUT CLASS */ LOGLMT=999999, /* CLOSE SLOG. 999.999 WTL'S */ LPA=(S3,L), /* LPALSTS3 LPALIST MEMBER */ MAXUSER=100, /* MAX. 100 ADDRESS SPACES */ MSTRJCL=00, /* MSTJCL00 LMOD MEMBER SYS1.LINKLIB */ NSYSLX=60, /* NUMBER OF SYSTEM LX-ES RESERVED */ F2=Save F3=End F5=RFind F7=Up F8=Down F10=Left F11=Right
Enter the four digit device address, or alternatively the volume serial number if the volume has been referred to previously.
ZZSAGDEV VTOC List Utility Command ===> Enter 4 digit DASD device number: ===> _ or DASD volume serial: ===> Note: The DASD volume must have been accessed previously in order to be able to specify the volume serial. If the device number is unknown use primary menu option 0 to read all DASD volume labels first.
In addition to the dataset names found on the volume, the following information will be displayed:
| DSORG | Dataset organisation ie VS, PO, PO-E |
| RECFM | Record Format ie FB, VB, U |
| BLKSIZE | Maximum block size |
| LRECL | Logical Record Length |
| CRDATE | Creation date |
| REFDATE | Last reference date
(This utility does not update the last reference date) |
| EXPDT | Expiration date |
| EXTENT | Number of extends, followed by the extend addresses in CCHH format |
ZZSABROW VTOC listing SYSACC(0926) Command ===> _ Line 0000 Col 0001 ********************************* Top of Data ********************************** SYS1.AAID.CLIST DSORG=PO RECFM=VB BLKSIZE=06144 SYS1.AAID.MSGS DSORG=PO RECFM=FB BLKSIZE=06160 SYS1.AAID.PANELS DSORG=PO RECFM=FB BLKSIZE=06160 SYS1.AAID.TABLES DSORG=PO RECFM=FB BLKSIZE=06160 SYS1.ADCOB.CLIST DSORG=PO RECFM=VB BLKSIZE=06144 SYS1.ADLE.CLIST DSORG=PO RECFM=VB BLKSIZE=06144 SYS1.AD370.CLIST DSORG=PO RECFM=VB BLKSIZE=06144 SYS1.AD370.MSGS DSORG=PO RECFM=FB BLKSIZE=06160 SYS1.AD370.PANELS DSORG=PO RECFM=FB BLKSIZE=06160 SYS1.AD370.SKELS DSORG=PO RECFM=FB BLKSIZE=06160 SYS1.AI.CLIST DSORG=PO RECFM=VB BLKSIZE=06144 SYS1.AI.PANELS DSORG=PO RECFM=FB BLKSIZE=06160 SYS1.AI.SKELS DSORG=PO RECFM=FB BLKSIZE=06160 SYS1.APL.CLIST DSORG=PO RECFM=VB BLKSIZE=06144 SYS1.BOOK.EXEC DSORG=PO RECFM=VB BLKSIZE=06144 SYS1.BOOK.MSGDAN DSORG=PO RECFM=FB BLKSIZE=06160 SYS1.BOOK.MSGDEU DSORG=PO RECFM=FB BLKSIZE=06160 SYS1.BOOK.MSGESP DSORG=PO RECFM=FB BLKSIZE=06160 SYS1.BOOK.MSGFRA DSORG=PO RECFM=FB BLKSIZE=06160 SYS1.BOOK.MSGITA DSORG=PO RECFM=FB BLKSIZE=06160 F3=End F5=RFind F7=Up F8=Down F10=Left F11=Right
ZZSABROW VTOC listing SYSACC(0926) Command ===> _ Line 0398 Col 0001 SYS1.HELP DSORG=PO RECFM=FB BLKSIZE=06160 SYS1.HELPENP DSORG=PO RECFM=FB BLKSIZE=06160 SYS1.HRFCLST DSORG=PO RECFM=VB BLKSIZE=06144 SYS1.HRFMSG DSORG=PO RECFM=FB BLKSIZE=06160 SYS1.HRFPANL DSORG=PO RECFM=FB BLKSIZE=06160 SYS1.HRFSKEL DSORG=PO RECFM=FB BLKSIZE=06160 SYS1.ICEDGTC DSORG=PO RECFM=VB BLKSIZE=06144 SYS1.ICEDGTL DSORG=PO RECFM=U BLKSIZE=06144 SYS1.ICEDGTM DSORG=PO RECFM=FB BLKSIZE=06160 SYS1.ICEDGTP DSORG=PO RECFM=FB BLKSIZE=06160 SYS1.ICEDGTS DSORG=PO RECFM=FB BLKSIZE=06160 SYS1.ICEDGTT DSORG=PO RECFM=FB BLKSIZE=06160 SYS1.ICEISPC DSORG=PO RECFM=VB BLKSIZE=06144 SYS1.ICEISPL DSORG=PO RECFM=U BLKSIZE=06144 SYS1.ICEISPM DSORG=PO RECFM=FB BLKSIZE=06160 SYS1.ICEISPP DSORG=PO RECFM=FB BLKSIZE=06160 SYS1.ICEISPS DSORG=PO RECFM=FB BLKSIZE=06160 SYS1.ICEISPT DSORG=PO RECFM=FB BLKSIZE=06160 SYS1.ICEMAC DSORG=PO RECFM=FB BLKSIZE=06160 SYS1.ICEUSER DSORG=PO RECFM=FB BLKSIZE=06160 SYS1.ICQABTXT DSORG=PO RECFM=FB BLKSIZE=06160 F3=End F5=RFind F7=Up F8=Down F10=Left F11=Right
ZZSABROW VTOC listing SYSACC(0926) Command ===> _ Line 0398 Col 0081 LRECL=00080 CRDATE=89026 REFDATE=89229 EXPDT=00000 EXTENT=001 01F50005-01FD0006 LRECL=00080 CRDATE=89026 REFDATE=89026 EXPDT=00000 EXTENT=001 01FD0007-01FF000B LRECL=00255 CRDATE=89026 REFDATE=89092 EXPDT=00000 EXTENT=001 018E000C-018F000A LRECL=00080 CRDATE=89026 REFDATE=89092 EXPDT=00000 EXTENT=001 01FF000C-02000006 LRECL=00080 CRDATE=89026 REFDATE=89092 EXPDT=00000 EXTENT=001 02000007-020B0002 LRECL=00080 CRDATE=89026 REFDATE=89092 EXPDT=00000 EXTENT=001 020B0003-020E0006 LRECL=00255 CRDATE=89026 REFDATE=89026 EXPDT=00000 EXTENT=001 018F000B-018F000D LRECL=00000 CRDATE=89026 REFDATE=89210 EXPDT=00000 EXTENT=001 020E0007-020E000A LRECL=00080 CRDATE=89026 REFDATE=89026 EXPDT=00000 EXTENT=001 020E000B-020E000D LRECL=00080 CRDATE=89026 REFDATE=89026 EXPDT=00000 EXTENT=001 020E000E-020F0006 LRECL=00080 CRDATE=89026 REFDATE=89026 EXPDT=00000 EXTENT=001 020F0007-020F0009 LRECL=00080 CRDATE=89026 REFDATE=89026 EXPDT=00000 EXTENT=001 020F000A-020F000C LRECL=00255 CRDATE=89026 REFDATE=89026 EXPDT=00000 EXTENT=001 018F000E-01900003 LRECL=00000 CRDATE=89026 REFDATE=89210 EXPDT=00000 EXTENT=001 020F000D-02100005 LRECL=00080 CRDATE=89026 REFDATE=89026 EXPDT=00000 EXTENT=001 02100006-0210000C LRECL=00080 CRDATE=89026 REFDATE=89026 EXPDT=00000 EXTENT=001 0210000D-02170001 LRECL=00080 CRDATE=89026 REFDATE=89026 EXPDT=00000 EXTENT=001 02170002-02170005 LRECL=00080 CRDATE=89026 REFDATE=89026 EXPDT=00000 EXTENT=001 02170006-02170008 LRECL=00080 CRDATE=89026 REFDATE=89026 EXPDT=00000 EXTENT=001 02170009-02180001 LRECL=00080 CRDATE=89026 REFDATE=89026 EXPDT=00000 EXTENT=001 02180002-02180007 LRECL=00080 CRDATE=89026 REFDATE=89026 EXPDT=00000 EXTENT=001 02180008-0218000E F3=End F5=RFind F7=Up F8=Down F10=Left F11=Right
Enter the fully qualified dataset name without quotes.
If the volume has been referred to, or option 0 has been used to initialise the volume serial table, then a volser can be entered rather then a device address. If the volume is being referred to for the first time since the IPL then the device address must be given.
The output will either be in loadmodule or ispf stats format.
ZZSALPDS List PDS Directory Command ===> Enter dataset name: ===> _ and 4 digit DASD device number: ===> or DASD volume serial: ===> Note: The DASD volume must have been accessed previously in order to be able to specify the volume serial. If the device number is unknown use primary menu option 0 to read all DASD volume labels first.
| TTR | Relative position of member in PDS |
| CCHHR | Absolute track address of member |
| VER | Member version and level |
| CRDATE | Creation date |
| CHDATE | Date of last update |
| CHTIME | Time of last update |
| SIZE | Size in records |
| INIT | Initial member size |
| MOD | Modifications |
| ID | Userid of last update |
ZZSABROW Directory SYS1.PARMLIB Command ===> _ Line 0000 Col 0001 ********************************* Top of Data ********************************** AAAAAAAA TTR=000F1B CCHHR=0B7900001B VER=01.00 CRDATE=90.166 CHDATE=90.166 CHTIM ADYSET00 TTR=000F0A CCHHR=0B7900000A VER=01.02 CRDATE=90.072 CHDATE=90.075 CHTIM ADYSET01 TTR=000F08 CCHHR=0B79000008 VER=01.01 CRDATE=90.072 CHDATE=90.075 CHTIM ADYSET02 TTR=000F0C CCHHR=0B7900000C VER=01.02 CRDATE=90.072 CHDATE=90.075 CHTIM ALLOC00 TTR=000F0E CCHHR=0B7900000E VER=01.02 CRDATE=90.329 CHDATE=90.075 CHTIM APPCPMS3 TTR=001214 CCHHR=0B79000314 VER=01.00 CRDATE=89.206 CHDATE=89.206 CHTIM ASCHPMS3 TTR=00110D CCHHR=0B7900020D ASFPBPS3 TTR=001205 CCHHR=0B79000305 VER=01.00 CRDATE=89.104 CHDATE=89.104 CHTIM CLOCKOP TTR=001006 CCHHR=0B79000106 VER=01.00 CRDATE=90.266 CHDATE=90.266 CHTIM CLOCKST TTR=001002 CCHHR=0B79000102 VER=01.01 CRDATE=90.090 CHDATE=90.266 CHTIM CLOCKWT TTR=001004 CCHHR=0B79000104 VER=01.01 CRDATE=90.090 CHDATE=90.266 CHTIM CLOCK00 TTR=00120B CCHHR=0B7900030B VER=01.10 CRDATE=90.123 CHDATE=90.268 CHTIM CNLENU00 TTR=000102 CCHHR=0B78000102 VER=01.00 CRDATE=89.325 CHDATE=90.005 CHTIM COFDLF00 TTR=000104 CCHHR=0B78000104 VER=01.01 CRDATE=89.005 CHDATE=89.005 CHTIM COFVLFS3 TTR=000106 CCHHR=0B78000106 VER=01.01 CRDATE=89.057 CHDATE=89.089 CHTIM COFVLF00 TTR=000108 CCHHR=0B78000108 VER=01.00 CRDATE=89.351 CHDATE=90.005 CHTIM COMMNDS3 TTR=001B04 CCHHR=0B79000C04 VER=01.09 CRDATE=89.344 CHDATE=90.229 CHTIM CONFIGS3 TTR=00010A CCHHR=0B7800010A VER=01.00 CRDATE=89.344 CHDATE=89.344 CHTIM CONSOLS3 TTR=00010C CCHHR=0B7800010C VER=01.00 CRDATE=89.344 CHDATE=89.344 CHTIM COUPLES3 TTR=001B12 CCHHR=0B79000C12 VER=01.02 CRDATE=87.105 CHDATE=87.106 CHTIM F3=End F5=RFind F7=Up F8=Down F10=Left F11=Right
ZZSABROW Directory SYS1.PARMLIB Command ===> _ Line 0000 Col 0051 ********************************* Top of Data ********************************** ATE=90.166 CHDATE=90.166 CHTIME=13:47:26 SIZE=0038 INIT=0038 MOD=0000 ID=T1TC ATE=90.072 CHDATE=90.075 CHTIME=09:50:37 SIZE=0015 INIT=0015 MOD=0000 ID=T1SC ATE=90.072 CHDATE=90.075 CHTIME=09:46:34 SIZE=0011 INIT=0011 MOD=0000 ID=T1SC ATE=90.072 CHDATE=90.075 CHTIME=09:50:59 SIZE=0013 INIT=0013 MOD=0000 ID=T1SC ATE=90.329 CHDATE=90.075 CHTIME=10:22:49 SIZE=0109 INIT=0109 MOD=0000 ID=T1SC ATE=90.206 CHDATE=90.206 CHTIME=14:09:18 SIZE=0004 INIT=0004 MOD=0000 ID=T2JJ ATE=89.104 CHDATE=89.104 CHTIME=12:30:56 SIZE=0057 INIT=0057 MOD=0000 ID=TSJJ ATE=90.266 CHDATE=90.266 CHTIME=15:16:27 SIZE=0005 INIT=0005 MOD=0000 ID=T1SC ATE=90.090 CHDATE=90.266 CHTIME=12:41:39 SIZE=0005 INIT=0005 MOD=0000 ID=T1SC ATE=90.090 CHDATE=90.266 CHTIME=12:41:43 SIZE=0005 INIT=0005 MOD=0000 ID=T1SC ATE=89.123 CHDATE=89.268 CHTIME=11:04:32 SIZE=0005 INIT=0002 MOD=0000 ID=TSJH ATE=88.325 CHDATE=89.005 CHTIME=13:24:47 SIZE=0049 INIT=0049 MOD=0000 ID=TSWR ATE=89.005 CHDATE=89.005 CHTIME=13:26:55 SIZE=0026 INIT=0026 MOD=0001 ID=TSWR ATE=89.057 CHDATE=89.089 CHTIME=14:16:27 SIZE=0033 INIT=0041 MOD=0000 ID=TSTC ATE=88.351 CHDATE=89.005 CHTIME=13:52:39 SIZE=0032 INIT=0032 MOD=0000 ID=TSWR ATE=88.344 CHDATE=89.229 CHTIME=14:44:29 SIZE=0012 INIT=0006 MOD=0007 ID=TSJJ ATE=88.344 CHDATE=89.344 CHTIME=21:13:36 SIZE=0059 INIT=0059 MOD=0000 ID=TSTC ATE=89.344 CHDATE=89.344 CHTIME=20:55:56 SIZE=0225 INIT=0225 MOD=0000 ID=TSTC ATE=87.105 CHDATE=87.106 CHTIME=10:07:30 SIZE=0006 INIT=0001 MOD=0006 ID=TSJJ F3=End F5=RFind F7=Up F8=Down F10=Left F11=Right
| SIZE | Virtual storage required to load the module |
| EP | Entry point address |
| AC | Authorisation code |
| AMODE | Addressing mode |
| RMODE | Residency mode |
| MAIN | Name of main entry point
This field is only valid for an alias |
| ATTR | Attributes such as RENT, REFR etc |
ZZSABROW Directory SYS1.LPALIB Command ===> _ Line 0000 Col 0001 ********************************* Top of Data ********************************** ACYAPCIP TTR=00C314 CCHHR=02E3000D14 SIZE=006C40 EP=000000 AC=00 AMODE=31 RMODE ACYAPCNP TTR=00C314 CCHHR=02E3000D14 SIZE=006C40 EP=0000C0 AC=00 AMODE=31 RMODE ACYAPCPP TTR=00C314 CCHHR=02E3000D14 SIZE=006C40 EP=000308 AC=00 AMODE=31 RMODE ACYAPDRP TTR=00C314 CCHHR=02E3000D14 SIZE=006C40 EP=002148 AC=00 AMODE=31 RMODE ACYAPD1P TTR=00C314 CCHHR=02E3000D14 SIZE=006C40 EP=002900 AC=00 AMODE=31 RMODE ACYAPFLP TTR=00C314 CCHHR=02E3000D14 SIZE=006C40 EP=0032A8 AC=00 AMODE=31 RMODE ACYAPQCP TTR=00C314 CCHHR=02E3000D14 SIZE=006C40 EP=0038D0 AC=00 AMODE=31 RMODE ACYAPQRP TTR=00C314 CCHHR=02E3000D14 SIZE=006C40 EP=003F20 AC=00 AMODE=31 RMODE ACYAPRGP TTR=00C314 CCHHR=02E3000D14 SIZE=006C40 EP=004670 AC=00 AMODE=31 RMODE ACYAPRIP TTR=00C314 CCHHR=02E3000D14 SIZE=006C40 EP=005570 AC=00 AMODE=31 RMODE ACYAPRQP TTR=00C314 CCHHR=02E3000D14 SIZE=006C40 EP=005790 AC=00 AMODE=31 RMODE ACYAPRSP TTR=00C314 CCHHR=02E3000D14 SIZE=006C40 EP=005CD0 AC=00 AMODE=31 RMODE ACYAPSLP TTR=00C314 CCHHR=02E3000D14 SIZE=006C40 EP=006540 AC=00 AMODE=31 RMODE ADYPRED TTR=00580C CCHHR=02DC000B0C SIZE=0013B8 EP=000000 AC=00 AMODE=31 RMODE AHLACFV TTR=00681F CCHHR=02DD000C1F SIZE=000668 EP=00001C AC=00 AMODE=31 RMODE AHLDMPMD TTR=006523 CCHHR=02DD000923 SIZE=001728 EP=000B84 AC=00 AMODE=31 RMODE AHLDSP TTR=006831 CCHHR=02DD000C31 SIZE=0007C8 EP=00008E AC=00 AMODE=31 RMODE AHLEXT TTR=00680D CCHHR=02DD000C0D SIZE=000AA0 EP=00012A AC=00 AMODE=31 RMODE AHLFFP TTR=009F0E CCHHR=02E100070E SIZE=005800 EP=000000 AC=00 AMODE=31 RMODE AHLFIO TTR=006804 CCHHR=02DD000C04 SIZE=0006F0 EP=00001C AC=00 AMODE=31 RMODE F3=End F5=RFind F7=Up F8=Down F10=Left F11=Right
ZZSABROW Directory SYS1.LPALIB Command ===> _ Line 0000 Col 0051 ********************************* Top of Data ********************************** P=000000 AC=00 AMODE=31 RMODE=ANY MAIN=ACYAPCNP ATTR=(RN,RU) P=0000C0 AC=00 AMODE=31 RMODE=ANY ATTR=(RN,RU) P=000308 AC=00 AMODE=31 RMODE=ANY MAIN=ACYAPCNP ATTR=(RN,RU) P=002148 AC=00 AMODE=31 RMODE=ANY MAIN=ACYAPCNP ATTR=(RN,RU) P=002900 AC=00 AMODE=31 RMODE=ANY MAIN=ACYAPCNP ATTR=(RN,RU) P=0032A8 AC=00 AMODE=31 RMODE=ANY MAIN=ACYAPCNP ATTR=(RN,RU) P=0038D0 AC=00 AMODE=31 RMODE=ANY MAIN=ACYAPCNP ATTR=(RN,RU) P=003F20 AC=00 AMODE=31 RMODE=ANY MAIN=ACYAPCNP ATTR=(RN,RU) P=004670 AC=00 AMODE=31 RMODE=ANY MAIN=ACYAPCNP ATTR=(RN,RU) P=005570 AC=00 AMODE=31 RMODE=ANY MAIN=ACYAPCNP ATTR=(RN,RU) P=005790 AC=00 AMODE=31 RMODE=ANY MAIN=ACYAPCNP ATTR=(RN,RU) P=005CD0 AC=00 AMODE=31 RMODE=ANY MAIN=ACYAPCNP ATTR=(RN,RU) P=006540 AC=00 AMODE=31 RMODE=ANY MAIN=ACYAPCNP ATTR=(RN,RU) P=000000 AC=00 AMODE=31 RMODE=ANY ATTR=(RN,RU) P=00001C AC=00 AMODE=31 RMODE=ANY MAIN=AHLTVTAM ATTR=(RN,RU) P=000B84 AC=00 AMODE=31 RMODE=ANY MAIN=AHLSETD ATTR=(RN,RU) P=00008E AC=00 AMODE=31 RMODE=ANY MAIN=AHLTXSYS ATTR=(RN,RU) P=00012A AC=00 AMODE=31 RMODE=ANY MAIN=AHLTSYSM ATTR=(RN,RU) P=000000 AC=00 AMODE=31 RMODE=ANY MAIN=AHLFVEC ATTR=(RN,RU,RF) P=00001C AC=00 AMODE=31 RMODE=ANY MAIN=AHLTSYFL ATTR=(RN,RU) F3=End F5=RFind F7=Up F8=Down F10=Left F11=Right
Enter the four digit device address.
ZZSAGVOL Display DASD Record 3 (VOL1) Command ===> Enter 4 digit DASD device number: ===> _
ZZSABROW DASD record 3 for device 0926 Command ===> _ Line 0000 Col 0001 ********************************* Top of Data ********************************** Volume Label Identifier VOL Volume Label Number 1 Volume Serial Number SYSACC VTOC Pointer (CCHHR) 0459000001 Volume Security X'40' Owner Name and Address Code SYS1 ******************************** Bottom of Data ******************************** F3=End F5=RFind F7=Up F8=Down F10=Left F11=Right
Enter the four digit device address and the ten digit CCHHR address of the record to be displayed.
ZZSADUMP Dump DASD record Command ===> Enter 4 digit DASD device number: ===> _ and record address in 10 digit CCHHR format: ===>
ZZSABROW DASD record dump Command ===> _ Line 0000 Col 0001 ********************************* Top of Data ********************************** Device 0926(SYSACC) CCHHR 0000 0000 03 Sector 0E(014) Key length 04(004) Data length 0050(00080) Key 0000 E5D6D3F1 VOL1 Data 0000 E5D6D3F1 E2E8E2C1 C3C34004 59000001 VOL1SYSACC ._... 0010 40404040 40404040 40404040 40404040 0020 40404040 40E2E8E2 F1404040 40404040 SYS1 0030 40404040 40404040 40404040 40404040 0040 40404040 40404040 40404040 40404040 ******************************** Bottom of Data ******************************** F3=End F5=RFind F7=Up F8=Down F10=Left F11=Right
Supply the four digit device number and the ten digit CCHHR address on the ZZSAALTR panel.
ZZSAALTR Alter DASD record Command ===> Enter 4 digit DASD device number: ===> 0926 and record address in 10 digit CCHHR format: ===> 0000000003_
Zap supports the following primary commands:
Will move max-right, max-left, top or bottem depending on the pf-key pressed.
Will move to the top (line 1) of the file.
Will move to the last line of the file.
Moves one page backward. When the cursor is located in the output area, the current line will become the last line in the output area.
Moves one page forward. When the cursor is located in the output area, the current line will become the first line in the output area.
When saving a dataset or member only updated records will be written back to DASD, a SAVE command with no changed data will not cause a DASD update to occur. SAVE will not update any fields in the F1DSCB, last reference dates etc. will not be updated.
Returns to previous panel. Data will be discarded, use SAVE to save data first.
Updated, but unsaved fields appear hilited, and will revert back to their original intensity when the data is saved.
ZZSADZAP Alter DASD 0926 CCHHR 0000000003 Command ===> _ Offset 0000 Key 0000 E5 D6 D3 F1 VOL1 Data 0000 E5 D6 D3 F1 E2 E8 E2 C1 C3 C3 40 04 59 00 00 01 VOL1SYSACC ._... 0010 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 0020 40 40 40 40 40 E2 E8 E2 F2 40 40 40 40 40 40 40 SYS2 0030 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 0040 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 F2=Save F3=End F7=Up F8=Down
The first 16M of central storage are cleared before loading a disabled wait PSW. This will prevent unauthorised access to sensitive data, and render the utility inelidgeble for restart. It can only be restarted with an IPL.
ZZSAWAIT Stand Alone Utilities Loading disabled wait PSW Program terminated. Jan Jaeger - Version 12/29/90-15.44
Modification levels are:
| J1 | 15/05/93 | Valid paths not correctly listed |
| J2 | 11/09/94 | Device addresses gt X'7FFF' not recognised |
| J3 | 04/10/98 | DEAD0001 INTC X'15' on selected models when trying to change interruption parm on CFS subchannel while SCHV bit not set |
| J4 | 09/10/98 | Fix DEAD0005 on exit of PDS member list when PDS contains no members |
| J5 | 10/10/98 | Fix overlay on primary option menu |
| J6 | 10/10/98 | Fix random posting of wait on I/O completion after timeout has occurred |
| J7 | 14/10/98 | Fix DEAD0005 on invalid or corrupted VTOC |
| J8 | 24/10/98 | Reduce storage requirements for UCB table |
| J9 | 28/02/02 | Add IPL from CDROM support |
IPLTEXT is distributed in distribution file zzsa.zip
The CDROM ISO image is distributed in file zzsa.iso